基于EVSEWT的下击暴流时变平均风提取

下击暴流等极端风具有强烈的非平稳特性，给风场特性分析、结构响应计算带来挑战。根据经验将非平稳风分为时变平均风和零均值脉动风分别进行分析，是处理非平稳风速信号的有效方法。分析了几种常见时变均值提取方法的优缺点，在此基础上提出一种基于能量波谷寻找的经验小波变换方法，用于下击暴流时变平均风速提取，并将提取的时变平均风和脉动风用于分析某幢高层建筑顶部位移响应。对2组下击暴流的分析结果得出：与经验模态分解和离散小波变换方法相比，基于能量波谷寻找的经验小波变换方法模型提取的时变平均风更符合预期，对应的结构响应偏于安全。     

Formulations and solution algorithms for dynamic assembly routing problem

We study a dynamic version of the assembly routing problem. The assembly lot sizing section deals with decisions concerning the production phase, whereas the routing section organises the collection of raw materials necessary for the production. Traditionally, these two problems are treated separately, and more specifically, in a hierarchical way. We propose three linear programming models: a non-vehicle index model, a two-commodity flow formulation and a logic-based benders decomposition. We develop aggregated rounded capacity constraints for non-vehicle index model and separated them dynamically during the Branch & Cut procedure. Logic-based benders decomposition algorithm solves the Dynamic Assembly Routing Problem iteratively and obtains a feasible solution at each iteration. The numerical tests show that, the two first models are particularly effective at finding the optimal solutions in a reasonable amount of time on instances with up to 50 components and 3 periods.     

Morphology-dependent spin Seebeck effect in yttrium iron garnet thin films prepared by metal-organic decomposition

In this study, we examined the dependence of surface morphology and spin Seebeck effect (SSE) voltages on the poly[vinylpyrrolidone] (PVP) concentration in polycrystalline Y₃Fe₅O₁₂ (YIG) ultrathin films on a silicon substrate synthesized by metal-organic decomposition followed by a crystallization process. During fabrication, PVP concentrations of 0.5–2 g were used while all other conditions remained fixed. Atomic force microscopy and grazing incidence X-ray diffraction (XRD) measurements revealed a strong dependence of crystallinity and sample morphology on PVP concentration. The 1-g PVP sample had the smoothest surface, with a root mean square roughness of 0.2 nm, as well as superior bulk uniformity with respect to the shape and intensity of XRD reflection peaks. This was confirmed by scanning electron microscopy measurements of a cross-section of the sample that revealed a uniform film without pores. SSE measurements were performed to obtain the output SSE voltages (V_SSE) of all samples, to which a platinum layer was added as a spin-detection layer. Repeatedly, the 1-g PVP sample had the best performance, demonstrating the importance of film crystallinity and morphology in the spin-to-charge conversion efficiency of YIG films.     

The combustion behavior of epoxy-based multifunctional electrolytes

Multifunctional or structural electrolytes are characterized by ionic conductivity high enough to be used in the electrochemical devices and mechanical performance suitable for the structural applications. Preliminary insights are provided into the combustion behavior of structural bi-continuous electrolytes based on bisphenol A diglycidyl ether (DGEBA), synthesized using the techniques of reaction induced phase separation and emulsion templating. The effect of the composition of the structural electrolytes and external heat flux on the behavior of the formulations were studied using a cone calorimeter with gases formed during testing analyzed using FTIR. The composition of the formulations investigated was changed by varying the type and amount of the ion conductive part of the bi-continuous electrolyte. Two ionic liquids, 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMIM-TFSI) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF₄), as well as a deep eutectic solvent (DES) based on ethylene glycol and choline chloride, were used. The results obtained confirm that time to ignition, heat release rate (HRR), total mass loss, as well as the composition of the gases released during tests depend on the composition of the formulations. Addition of liquid electrolyte is found to reduce the time to ignition by up to 10% and the burning time by between 28% and 60% with the added benefit of reducing the HRR by at least 34%. Gaseous products such as CO₂, CO, H₂O, CH₄, C₂H₂, N₂O, NO, and HCN were detected for all formulations with the gases SO₂, NH₃, HCl, C₂H₄, and NH₃ found to be for certain formulations only.     

Novel mixed ligand complexes of Co(II), Ni(II), Cu(II), and Zn(II) with 1,10-phenanthroline and acesulfame. Synthesis,structural analysis and hydrogen adsorption study

Four novel metal organic framework (MOF) structures containing acesulfame (ace) and 1,10-phenanthroline (phen) ligands of Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ metal cations were synthesized. The crystal structure analysis of three compounds (1, 2, and 3) was also performed. The structural formula for complex 4 is proposed based on spectroscopic and thermal analysis data. It has been determined that structures 1, 2, and 4 are in a distorted octahedral geometry. It has been suggested that the charge balance of the coordination sphere with 2+ is provided by two monoanionic ace ligands located outside the coordination sphere as counter-ion. In structure 3, there are two Cu^II metal cations, two phen ligands coordinated as bidentate to each metal cation and ace ligand that provides monoanionic-monodentate coordination. The Cu²⁺ cation has distorted bipyramidal geometry. The maximum hydrogen gas adsorption has been found 1.4575 mL/g (0.046 wt%) for the Ni complex.     

The Investigation of the Fractional-View Dynamics of Helmholtz Equations Within Caputo Operator

It is eminent that partial differential equations are extensively meaningful in physics, mathematics and engineering. Natural phenomena are formulated with partial differential equations and are solved analytically or numerically to interrogate the system’s dynamical behavior. In the present research, mathematical modeling is extended and the modeling solutions Helmholtz equations are discussed in the fractional view of derivatives. First, the Helmholtz equations are presented in Caputo’s fractional derivative. Then Natural transformation, along with the decomposition method, is used to attain the series form solutions of the suggested problems. For justification of the proposed technique, it is applied to several numerical examples. The graphical representation of the solutions shows that the suggested technique is an accurate and effective technique with a high convergence rate than other methods. The less calculation and higher rate of convergence have confirmed the present technique’s reliability and applicability to solve partial differential equations and their systems in a fractional framework.     

The constrained two-dimensional guillotine cutting problem with defects: an ILP formulation,a Benders decomposition and a CP-based algorithm

This paper addresses a variant of two-dimensional cutting problems in which rectangular small pieces are obtained by cutting a rectangular object through guillotine cuts. The characteristics of this variant are (i) the object contains some defects, and the items cut must be defective-free; (ii) there is an upper bound on the number of times an item type may appear in the cutting pattern; (iii) the number of guillotine stages is not restricted. This problem commonly arises in industrial settings that deal with defective materials, e.g. either by intrinsic characteristics of the object as in the cutting of wooden boards with knotholes in the wood industry, or by the manufacturing process as in the production of flat glass in the glass industry. We propose a compact integer linear programming (ILP) model for this problem based on the discretisation of the defective object. As solution methods for the problem, we develop a Benders decomposition algorithm and a constraint-programming (CP) based algorithm. We evaluate these approaches through computational experiments, using benchmark instances from the literature. The results show that the methods are effective on different types of instances and can find optimal solutions even for instances with dimensions close to real-size.     

综合改进奇异谱分解和奇异值分解的齿轮故障特征提取方法

针对齿轮故障特征微弱，在强背景噪声下难以有效提取的问题，提出了一种改进奇异谱分解（ISSD）结合奇异值分解（SVD）的齿轮故障特征提取方法。针对奇异谱分解（SSD）算法中模态参数需凭经验选取的缺陷，基于散布熵优化算法对SSD算法进行了改进，在得到既定的一组奇异谱分量的基础上，根据峭度值最大准则筛选出了最佳奇异谱分量并进行了SVD处理，采用奇异值能量标准谱自适应地确定了信号重构阶数以还原信号和提高降噪效果。最后对信号进行包络解调以提取齿轮故障特征，将所提方法运用到仿真信号和齿轮实测信号中，并同传统包络谱、SSD包络谱以及经验模态分解结合SVD(EMD-SVD)方法进行了对比分析，结果表明，所提方法的降噪和特征提取效果更佳，能够更加有效地实现齿轮故障的判别。     

基于多参数特征保留的载荷谱加速耐久性编辑

为了得到时间更短加载效果相同的加速耐久性试验载荷谱,提出了基于多参数特征保留的载荷谱编辑方法。该方法同时考虑载荷谱的损伤、功率谱密度以及统计参数等信息,对零部件载荷谱的时间进行压缩。以汽车悬架螺旋弹簧的载荷谱为例,采用该方法进行缩减,同时从多个参数特征方面与传统的基于损伤保留的编辑方法所得到的载荷谱进行对比。为了进一步验证编辑效果,采用编辑谱和原始谱对弹簧进行疲劳仿真。结果表明,该方法能够有效缩短汽车零部件的载荷谱,可得到与原始载荷谱具有相同加载效果的编辑载荷谱。     

Wave packet enriched finite element for generalized thermoelasticity theories for thermal shock wave problems

A unified enriched finite element (FE) formulation for two generalized thermoelsaticity theories is developed for the transient thermal shock problems in one and two dimensional domains. Both the displacement and temperature field interpolations are enriched with harmonic functions defined in the local element coordinates. The coupled field finite element equations are derived using the generalized Hamilton’s principle and solved directly in time domain using the standard Newmark-β time integration technique as opposed to the transform techniques usually adopted for thermal shock problems. The method is assessed in comparison with the Laplace transform based analytical solutions and FE solutions with dynamic meshing available in the literature. It is shown that the present solution with a static uniform mesh captures the sharp discontinuities in the temperature and displacement fields and the wave properties of heat conduction very accurately, practically eliminating the severe drawbacks of the conventional FE solutions such as the spurious undulations and flattening out, while maintaining better computational e?ciency.